Considering cost? You may find lots of DIY resources on your Instagram or Pinterest. Doing things to craft your pool decks and swimming area is fun. Also, what makes the DIY path awesome is that it can save you expenses.

But once you do it yourself, there is no turning back from when the results turn bad. You may need to call the experts at the end of the day to do the construction work for you. Would not that double the cost?

Pool Resurfacing 411: Your Essential Guide to DIY Resurfacing - sufrace, resurface, pool, materials

Know from today’s post about pool decks, DIY vs. expert pool decking, resurfacing pool cost, and all-important facts!

Fact Check #1: What is Pool Resurfacing

Concrete pool decks make use of floor coating to seal and protect the surface from damages. Acrylic and epoxy coating are the most common pool deck sealers. When these coatings begin to wear and fade, the surfaces get exposed to damaging elements like water and pool chemicals.

A pool owner now employs a pool resurfacing. Pool contractors are the experts to provide this type of service. Sometimes, if the owner only got a small area to fix, they opt to DIY the pool resurfacing.

Pool resurfacing cost DIY or not will range from

Is DIY pool deck repair for you? Before you dive into doing it read this list below to enrich what you know about resurfacing the pool decks.

Fact Check #2: What to See: Signs You Need Resurfacing

Some signs tell you it is time for pool deck re4surfacing. What are these? You need to know how to identify if the cracks you see on the pool need immediate attention. Only then can you also learn how to decide if you can DIY the damage, or is it time for experts to do the work?

  • Flaking concrete surfaces
  • Peeling concrete coating
  • Discoloration on the surface
  • Rough surface due to combinations of two or more damages
  • Old and overused materials

Fact Check #3: Steps To Pool Resurfacing

Before you go right into pool resurfacing, know first the common type of pool decking materials ls where you might find yours:

  • Concrete decks
  • Tiled Decking Pools
  • Fiberglass drop
  • Vinyl Pool linings
  • Wooden Pool decks

In relation to the various types of materials you use, your swimming pool may be an in-ground or above-ground pool. Whether you prefer a kind of pool over the other, the same steps for resurfacing apply. Here they are:

1. Drain the Pool

The first step is to drain the water out of the pool. Of course. Seeing the bare floors and walls of the pool will let you know the extent of the damages. It is essential that before you get into the empty swimming pool, all the moisture and water dried out thoroughly to avoid slipping.

2. Prep The Pool deck Surface

Preparation involves removing old coating on the decking. Also, there may be severe damages, aged old decking that needs to go away. Resurfacing requires that the base of the deck is clear and free from other potential sources of flaws.

3. Deck Installation

Now it is time for installing the pool decking material of your choice. Go over to your local pool contractor’s site and learn from them the average number of working days for resurfacing the pool decks.

4. Plumb and Seal

The process does not end in putting over the decking. Of course, you have to make sure that the plumbing systems, filters, etc., are working correctly. As you check the plumbing or water pumps, perform pressure washing over the entire pool this time. Wash the pool shell, especially if you are using tiles for the pool floors. Washing the pool shells also ensures that the pool decking and surfaces are clear from any debris left from the resurfacing process.

After you ensure that all surfaces are clean, You can now apply the finish and sealer that suits your pool deck.

5. Install the FInishing Material

At this step, you can begin to see your newly resurfaced pool takes shape. Installing the finishing materials may take 1-3 days. Dep[ending on the material you choose to finish the decking, you may need to perform acid washing.

6. Post-Installation: Clean Up

Applying the p[ool finishing materials does not end the work. You still need to commit until the end. Are you still in? Now, after your finding is settled, it is time for clean-up and restoration. Make sure to fix the construction mess after all installing work. Do this before you fill the pool basin with the pol water.

7. Curing & Water Treatment

And at least, the final step. Once you refill the newly remodeled pool with the water, it is ready for treatment. But before adding the pool chemicals, make sure that the resurfaced decks are crude completely.